Views:27 Author:Site Editor Publish Time: 2018-10-25 Origin:Site
The use, maintenance and installation of the filling machine：
1) As the filling machine is an automatic machine, the dimensions of easy to pull bottles, bottle cushions and bottle caps are required to be unified.
2) Before driving, the machine must be turned by the handle to see if there is any abnormality in the rotation, and the machine can be driven after the normal operation is determined.
3) When adjusting the machine, the tool should be used properly. It is strictly forbidden to disassemble the parts with too large tool or too hard to avoid damaging the machine parts or affecting the machine performance.
4) When the machine is adjusted, make sure to tighten the loose screw, and turn the machine with the crank to see if its action meets the requirements before driving.
5) The machine must be kept clean. Oil, liquid or glass debris on the machine is strictly prohibited to cause corrosion.
6) Machine in the production process, timely remove the liquid or glass debris.
7) Clean the surface of the machine once before leaving and add the clean lubricant to the activity department.
8) Clean the area not easy to clean or blow with compressed air.
Need to pay attention to the installation of the filling machine：
1) After the machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time.
2) Install and adjust incoming and outgoing components according to the contour diagram in this manual.
3) Add new lubricating oil to each lubricating point.
4) Turn the machine with the crank to check whether the machine is running in the right direction (opposite to the motor spindle). The machine must be grounded.